Romford Embroiderers
Instructions for Jubilee Cup Cake Brooch
In your pack –
- White felt – some are pre marked with “icing” and backing
- Piece brown “cake” felt, to be trimmed to size later
- Lengths of 6 strand embroidery thread – Comprising yellow, pink and white. You will need to split this down to 2 strands for sewing.
- Selection of beads plus a “cherry” for the top!
- Brooch pin
To start –
- Outline the white felt with the cake outline and icing….we used dots. Use the templates which you should find on the table.
- Split thread to 2 strands and thread a needle. We used pink first.
- Sew beads onto the “icing” piece of felt or sew French knots in a mixed random fashion.

- Sew on the red bead as the Cherry.
- Cut out the “icing” felt, trimming to just inside the line. Save for later…

- Take brooch pin and sew to back of white felt where marked. Then cut out the whole of the “cake” shape. Save for later….
- Trim the brown felt to match the bottom of the cake shape.
- Stitch either back stitch or chain stitch to resemble the “flutes” of the cake mould.
- Layer up your “cake” pieces. You can use single strand for this for a finer stitch.
- Place brown “cake” on white backing. Stitch together with small stab stitches using white thread
- Add the “icing” piece on top using small stab stitches holding it altogether with white thread.
And there you are finished! Pin on and enjoy!
Please take a photo in our “frame” and share on Social Media and on Facebook!!








